| MODEL | RS-15-5 |
| OUTPUT | DC VOLTAGE | 5V |
| RATED CURRENT | 3A |
| CURRENT RANGE | 0~3A |
| RATED POWER | 15W |
| RIPPLE & NOISE (max.) Note.2 | 80mVp-p |
| VOLTAGE ADJ. RANGE | 4.75~5.5V |
| VOLTAGE TOLERANCE Note.3 | ±2.0% |
| LINE REGULATION Note.4 | ±0.5% |
| LOAD REGULATION Note.5 | ±1.5% |
| SETUP, RISE TIME | 1000ms, 30ms/230VAC 1000ms, 30ms/115VAC at full load |
| HOLD UP TIME (Typ.) | 70ms/230VAC 15ms/115VAC at full load |
| INPUT | VOLTAGE RANGE | 85 ~ 264VAC 120 ~ 370VDC |
| FREQUENCY RANGE | 47 ~ 63Hz |
| EFFICIENCY (Typ.) | 77% |
| AC CURRENT (Typ.) | 0.35A/115VAC 0.25A/230VAC |
| INRUSH CURRENT (Typ.) | COLD START 65A / 230VAC |
| LEAKAGE CURRENT | <2mA / 240VAC |
| PROTECTION | OVERLOAD | Above 105% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed |
| OVER VOLTAGE | 5.75 ~ 6.75V Protection type : Hiccup mode, recovers automatically after fault condition is removed |
| OVER TEMPERATURE | U1 Tj 1400C typically (U1) detect on main controlIC Protection type : Shut down o/p voltage, recovers automatically goes down |
| ENVIRONMENT | WORKING TEMP. | -25 ~ +70 °C (Refer to "Derating Curve") |
| WORKING HUMIDITY | 20 ~ 90% RH non-condensing |
| STORAGE TEMP., HUMIDITY | -40 ~ +85°C , 10 ~ 95% RH |
| TEMP. COEFFICIENT | ±0.03%/°C(0 ~ 50°C) |
| VIBRATION | 10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes |
SAFETY &
EMC | SAFETY STANDARDS | UL60950-1, TUV EN60950-1 approved |
| WITHSTAND VOLTAGE | I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
| ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25°C / 70% RH |
| EMI CONDUCTION & RADIATION | Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 |
| EMS IMMUNITY | Compliance to EN61000-4-2,3,4,5,6,8,11, EN61000-6-2 (EN50082-2), heavy industry level, criteria A |
| OTHERS | MTBF | 1608.8Khrs min. MIL-HDBK-217F (25°C) |
| DIMENSION | 62.5*51*28mm (L*W*H) |
| PACKING | 0.13Kg; 108pcs/15Kg/0.71CUFT |
